Thermal adhesive, paste and pads. For a single unit or the whole series.
For measurement, electronics, energy and repairing your own PC. Order small quantities directly, larger ones on request.
- Free shipping within Germany
- Delivery in 2–3 working days within Germany, by DHL/Deutsche Post
- Technical advice by email
What do you need to cool?
From sensors to battery modules: pick your area. There you will find typical components, suitable products and use cases.
Measurement & sensors
Thermally connect temperature probes, thermocouples and test setups, even where no screw fits.
View application →
Electronics & devices
Heatsinks on assemblies, displays and transformers: bond and carry heat away in one step.
View application →
Energy & storage
Battery modules, BMS, wall boxes and electrolysers: carry heat away from cells and power electronics.
View application →Technical cooling you can test first.
We develop and supply thermal interface products for devices, sensors and manufacturing. You describe your component, we recommend the right solution.
Samples
10 g and 30 g of adhesive to test on your own component.
Larger quantities
On request, also for series and recurring needs.
Data sheets
TDS and SDS on request, for paste and adhesive.
Advice
Technical questions by email, usually answered within one working day.
Bond where no screw fits.
For sensors, heatsinks and LED modules that sit directly on the component. Electrically non-conductive, handling strength after about 20 minutes and fully cured after about 12 hours.
- Available directly in 10 g and 30 g
- Holds permanently, without screws
- Larger quantities for manufacturing on request
Our main products
Free shipping within Germany.
The right material for your gap
The choice comes down to two things: how large the gap is and whether you want to be able to undo the joint.
| Thermal adhesive SG100X, SG100XS |
Thermal paste TC-009 |
Thermal pad TP100X |
Tape TT-25 |
|
|---|---|---|---|---|
| Gap | 0.1–0.5 mm | under 0.1 mm | 0.5–3 mm | up to about 0.2 mm, smooth surfaces |
| Fixing | adhesive, no screws | screwed | screwed | adhesive, full-surface |
| Removable | no, permanent | yes | yes | with care, by twisting |
| Typical use | Sensors, heatsinks, LED | CPU, GPU, measuring points | VRAM, M.2, cells | LED modules on profiles |
Swipe sideways to see the whole table.
Mounting, cleaning and care
Explained step by step, including how to undo a joint.
Thermal adhesive
Dispensing, curing and removing heatsinks.
To the guide →Thermal paste
Applying, renewing and cleaning properly.
To the guide →Thermal pads
Choosing the thickness, cutting and removing the film.
To the guide →Thermal adhesive tape
Bonding across a surface and removing it cleanly.
To the guide →